You are here: Home > Photos > Engines
Turnkey Engines, custom built by Pat Downs of CB Performance




Mike "Cheez" Brown's 2332cc Engine

Pat Downs built this motor for Mike "Cheez" Brown, a Manager for Sublime with Rome

Made 179hp @ 6000rpm
183 ft/lbs of Torque @ 4600rpm
Features:
84 stroke x 94 bore
Panchito 044s (40x35.5) w/VW650 Springs
#2292 Eagle Racing Cam (FK-10)
9:1 Compression
1 5/8" Low Down A-1 Stainless Exhaust System
48mm Weber IDAs w/37mm Venturi's
#2010 MS2 Ready to Run Ignition System
Match Ported Big Beef Manifolds (powder coated)
#3294 CB Speed Shop Billet Valve Covers
MST Alternator Stand




Blue 2332cc Turbo Engine

Made 330hp @ 6400rpm
290 ft/lbs of Torque @ 4300rpm
Features:
84 Stroke x 94 Bore
44 x 37.5 Super Pro Heads w/Titanium Retainers, VW650 Springs
#2292 Eagle Racing Camshaft (FK-10)
1.4:1 Ratio Rockers
8:1 Compression
Gen4 Turbo EFI Hybrid Turbo
Water/Meth Injection
Boost Control
Crank Trigger Ignition




Marc Auger's 2276cc Turbo Engine

Made 252hp and 248 ft/lbs of Torque @ 9 PSI
310hp and 298 ft/lbs of Torque @ 14 PSI
Features:
82 x 94
44 x 37.5 Super Pro Heads with VW650 Springs, 68cc Chambers
2250 Eagle Racing Camshaft
1.25:1 Ratio Rockers
Side Outlet Full Flow Oil Pump
Crank Trigger Ignition
Water / Meth Injection
Gen4 EFI
Dual 40mm Throttle Bodies
Stage-3 Kennedy Clutch
Dual Friction Disc




Blue 2160cc Engine

Made 162hp @ 6000rpm
168 ft/lbs of Torque @ 4600rpm
Features:
84 Stroke x 90.5 Bore
Mini Wedgeport Heads (42 x 37.5 valves, dual springs)
1.25:1 Ratio Rockers
#2246 Eagle Racing Cam
Dual Weber 44 IDF Carbs
Magnaspark Ignition
1-5/8" A-1 Sidewinder Exhaust
8.5:1 compression




2276cc Turbo EFI Engine

This turbo engine is for a customers Beck 550 Spyder. The boost level was kept low because the car is very lightweight (1550 lbs.) Since the Gen4 ECU controls water/meth injection, Pat decided it was needed to help lower intake air temps, since the customer lives in a rather hot climate. We are also controlling boost through the Gen4 ECU. The engine was eventually turned down to 5 psi, and it still produced 260hp and 252 ft/lbs. of torque.

Made 305hp @ 10psi boost
280 ft/lbs of Torque
Features:
Mini Wedge Port Heads w/VW-650 Springs,
#2301 Eagle Racing Cam,
1.25 Ratio Rockers,
Lightweight Flywheel,
Stage-3 Kennedy Clutch,
CB Super Disc,
30mm Lightweight Lifters,
.058 Wall Manton Push Rods,
94mm Mahle Pistons & Cylinders,
Straight Cut Cam Gears,
Modified Autostick Oil Pump to Scavenge Turbo,
CB's Gen4 EFI w/48mm Throttle Bodies,
60 lb. Injectors,
Boost Control,
Water/Meth Control,
Crank Trigger Ignition,
T04b Turbo
1 5/8" Mid-Engine Spyder Exhaust





2332cc Fuel Injected Engine

This engine was developed for a very rare 1959 Binz double cab. The customer, Anand Rajani did not want any holes drilled in the double cab to preserve it's original integrity. For this reason, no external oil cooler would be used. Pat decided to use Nikasil cylinders for their increased heat dissipation. The Los Panchito head was used for their high port velocity. Torque was the main goal for this engine build due to how heavy the double cab is (2300 lbs.) Along with the extremely high port velocity of the Los Panchito head, Pat used CB's new Gen4 EFI to build even more low end and mid-range torque.

Made 187.7hp @ 5320rpm
200.2 ft/lbs of Torque @ 4080rpm
Features:
84mm Stroke
Super Case (shuffle pinned, bronze lifter bores, sand sealed, full flowed)
5.500" Super Race Rods
94mm Nikasil Cylinders from LN Engineering,
J & E 94mm Pistons
#2242 Eagle Racing Cam
1.25:1 Rockers
Los Panchito Heads (40 x 35.5)
CB's Gen4 EFI System
Micro Cam Sync
A-1 Performance 1 5/8" Black Sidewinder Exhaust
MagnaSpark Crank Trigger Ignition System with LS-2 coils
#1706 4 Quart Ultra Wide Glide Sump
Sync-Link Throttle Linkage
9:1 Compression.





2005cc Fuel Injected Engine

The Powder coating finish on the Shroud and Tin is sometimes referred to as 'Hammer Tone'.

Made 140hp @ 5200rpm
147 ft/lbs of Torque @ 4200rpm
Features:
CB's Gen4 EFI System,
MagnaSpark Crank Trigger with Cam Sync
CB Billet Valve Covers
A-1 Black Sidewinder Exhaust
#2250 Eagle Racing Cam
Stock Ratio Rockers
40mm Throttle Bodies
8.8:1 Compression
30mm Full Flow Oil Pump
043 Heads with 40 x 35.5 Valves (hand ported and polished)
Round Port Manifolds
Super Race Crank
5.400" Super Race Rods
MST Black Anodized Alternator Stand






1915cc Turnkey Engine

COMPLETE TURN-KEY ENGINE: $8,200.00
Features:
Hand Ported OE VW Heads (37 x 32) Dual Spring
#2242 Eagle Racing Cam
#6413 Dual 44 IDF Webers
#1400 Pro-Series Straight Cut Cam Gears,
#1537 28mm Ultralight Lifters (set of 8),
#1303 Lightweight Flywheel,
#1628 Chromoly Push Rods - Blank End (.035”)
#1694 CB Speed Shop Billet Valve Covers (Black)
#3518 1 5/8” Dual Tip A-1 Black Ceramic Exhaust
#1877 OE Billet Pulley Serpentine Kit
#2000 MagnaSpark II Ready-to-run Kit
#1771 Oil Filler Breather Box Kit
#1770 Thin Line Oil Sump (1 1/2 qt.)
#2185 Custom Chrome Alternator - 55 amp (12 volt)
Gloss Black Powder Coating






2387cc Turnkey Engine

COMPLETE TURN-KEY ENGINE: $8,889.95

Made 207hp @ 6800rpm
170 ft/lbs of Torque @ 5400rpm
Features:
86 stroke x 94 bore
Ultra Wedge Port heads
#2289 Eagle Racing Cam
48 Weber IDA Dual Carb Kit
1.4:1 Ratio Rockers
9.5:1 Compression
1 3/4” A-1 Low-Down Exhaust
MS-Digital Ignition









2165cc Turnkey Engine

This engine is going into a '63 beetle on an IRS chassis. It will be used as a street car and road race car in Alaska.

Made 168hp @ 6200rpm
156 ft/lbs of Torque @ 4800rpm
Features:
78 Stroke x 94 Bore
5.600 length connecting rods
Ultra Wedge Port heads
#2256 Eagle Racing Camshaft
#1400 Pro Series straight cut gears
stock ratio rocker arms
9:1 compression
CB EFI with crank trigger ignition
48mm throttle bodies
28 lb injectors
Stainless A-1 1-3/4" low down exhaust system






2005cc Turnkey Engine

This engine is going in a VW Thing and it was built for low and mid range torque. Once again, notice the extremely flat torque curve of the off road grind #2256 Eagle Racing Cam. This is becoming one of my favorite grinds for applications requiring low and mid range torque.
Features:
CNC Round Port Heads (40 x 35.5 valves)
#2256 Eagle Racing Cam on 107 degree lobe center
Dual 44 IDF Weber Carbs
1-1/2 A-1 Sidewinder Exhaust for a Thing
8.8:1 compression
1.1:1 ratio rocker arms
Magnaspark Ignition
5.400" length race rods






2054cc Turnkey Engine (made 149hp)

This engine makes an incredibly flat torque curve, 128 ft-lbs. @3000 rpm and 128 ft-lbs. @6000 rpm, peaking at 152 ft-lb.s @4700 rpm. This 2054cc engine is going into a Manx Buggy and should be a blast to drive. The cam is a new grind, that we have introduced as our Eagle Cam #2256.
Features:
74 Stroke x 94 Bore,
Los Panchito heads
9:1 compression
Magnaspark Ignition System
Serpentine Belt System
#2256 Eagle Racing Camshaft
Dual 44 IDF Weber Carbs on CB Big Beef Intake Manifolds
1-5/8" Myers Manx Exhaust System






1904cc Turnkey Engine (made 132hp)

This engine was dyno'd on October 10th, 2014.

COMPLETE TURN-KEY ENGINE:
$6,195.95 (without exhaust)

Features:
74 Stroke x 90.5 Bore
CNC Round Port Heads (40 x 35.5 valves)
#1877 OEM Look Serpentine Belt system
A-1 Sidewinder Exhaust with Heater Boxes





1904cc Turnkey Engine

COMPLETE TURN-KEY ENGINE:
$6,995 w/o exhaust.

Made 130hp @ 5600rpm
138 ft/lbs of Torque

Features:
CNC Round Port Heads with 40 x 35.5 Dual Springs
#2242 Eagle Racing Cam
1.1:1 Rockers
9:1 Compression
44 IDF Carbs with 32mm Venturis
A-1 1-1/2" Stainless Steel Exhaust.






2005cc Turnkey Engine

This is a 2005cc going into a Manx buggy in Canada.

Made 152hp @ 6030rpm
156 ft/lbs of Torque @ 4900rpm
Features:
Mini Wedgeport heads with 42x37.5 valves
9.5:1 compression
#2246 Eagle Racing Camshaft
1.25 ratio rockers
MagnaSpark ignition
Dual 44 Weber IDF Carbs.






1915cc Turnkey Engine

This is a Brand New 1915cc going into another Beck Speedster. It has low compression (7.5:1) because it will have air conditioning installed. Heads are stock with stainless steel valves, hi-rev springs and CNC reshaped combustion chambers to lower compression and unshroud the valves, increasing air flow. It uses our 1.25:1 ratio rocker arms, Magnaspark Ignition and Dual ICT Weber Carbs.

Made 83hp @ 4700rpm
113 ft/lbs of Torque @ 2700rpm
Features:
7.5:1 Compression
#2280 Eagle Racing Camshaft
Stock Heads (with S/S Valves, hi-rev springs and CNC reshaped combustion chambers)
1.25:1 Ratio Rockers
Magnaspark Ignition
Dual ICT Weber Carbs






2005cc Turnkey Engine

This engine was built for Manual Ruiz's Beck Speedster in Puerto Rico.
Features:
Mini Wedge Port Heads
78 Stroke x 90.5 Bore
#2246 Eagle Racing Camshaft
Stock Rockers
Magnaspark Ignition
8:1 Compression.




























2005cc Turnkey Engine

Made 142hp @ 4000-4500rpm
149 ft/lbs of Torque @ 4000-4500rpm
Features:
Los Panchito Heads
#2242 Eagle Racing Camshaft
1.25:1 Rockers
1 1/2" Exhaust
Dual 44mm IDF Weber Carbs with 32mm Venturi's
Magnaspark Ignition
8.5:1 Compression







2110cc Turnkey Engine

Frank Payne's Porsche Speedster Engine.

Made 150hp
145 ft/lbs of Torque
Features:
Los Panchito Heads with Dual Springs, 40 x 35.5 Valves
#2246 Eagle Racing Camshaft
1.25:1 Ratio Rockers
44 Weber Carbs






1915cc Turnkey Engine

Pat Downs built this motor to be installed in a customer's Beck 356 Speedster.

Made 130hp @ 5600rpm
131 ft/lbs of Torque @ 4400rpm
Features:
Los Panchito Heads
#2242 Eagle Racing Camshaft
1.25:1 Ratio Rockers
Dual 44mm Weber Carbs with 32mm Venturi's






2332cc Turbo EFI Engine

911 Porsche fan shroud painted with House of Kolors Sunset Pearl paint. Engine includes a custom 3/8" S/S hard lines for fuel and vacuum.

COMPLETE TURN-KEY ENGINE:
$13,200

Made 315hp @ 12psi
340 ft/lbs of Torque on 91 octane premium unleaded pump fuel
Features:
T03/T04 hybrid turbo
TurboSmart wastegate
52lb per hour injectors
48mm throttle bodies
Magna F/S hideaway turbo EFI kit
Mini Wedgeport heads with 68cc combustion chambers, VW650 valve springs and titanium retainers
#2300 Eagle Racing Camshaft (276 duration @.050/ .538 lift)
1.25 ratio rockers
Lightweight racing lifters
Manton .058 wall chromoly push rods
4 Quart ultra wide oil sump
30mm full flow oil pump
Sync Link throttle linkage










This engine is a 2110cc with our 42x37.5 Super pro heads, 8-1 compression, #2246 camshaft with stock ratio rockers. It uses our Magna F/S efi system with crank trigger timing, idle air control and 40mm throttle bodies. The engine produced 150 h-p @5800 rpm and 149 ft lbs of torque at 4500 rpm. We built this engine for a customer in Fresno California, it is going into his Manx dune buggy.